The value of printed circuit boards or simply PCBs in the technological world can never be denied, irrespective of your knowledge about them. We realize that the PCBs can be used in every piece of technology, and thus its importance. And even if you were not to appreciate its use, you will be marveled by how it is assembled. It is evidence enough of technological advancement in the world today. To appreciate the importance of the PCBs, perhaps it is necessary that you know some of the pros and cons. This article looks at the pros and cons of choosing PCB design software.

Pros

Minimal short circuits

In any electronic setup, shorts and wiring issues are taken with a lot of seriousness. And in most cases, manually constructed breadboards are so common with these issues, thus there was need to find a way to correct the mistake. The introduction of PCB design software has helped the situation, reducing the issues of short circuits.

The short circuiting issues have been reduced by the fact that the entire PCB assembly is done by a computer, thus reducing the errors that could lead to short circuiting. With the help of Altium’s PCB design software, the engineers are now able to come up with a short-free wiring that can guarantee the safety of the users.

Fixed components

Today, unlike before, all the components are permanently fixed on the PCB, thanks to the PCB design software. The software has also eliminated the need for complex and cumbersome wiring system, thus all the components are easily and quickly fixed. This has enabled the users to customize the system according to their needs.

Mass production

The software makes it easy for one to produce several PCBs in a single production run, provided that one has a finished working design. This is made possible by the fact that all you will have to do is load the design files into the computer, and then print them onto a copper board. Better still, you will be doing this all alone, as no additional manpower will be required. This way, you will be producing in mass, yet at minimal costs.

Guaranteed satisfaction

Engineers will confirm that throughout the production process, the PCBs go through a strict inspection process. This has eliminated the worry of poorly designed components or short circuits. This implies that any of the designs you take will be of good quality, and thus will provide maximum satisfaction.

Cons

Note that the cons of a PCB design software are nothing compared to the problems that you will experience is you chose the manual way. For this reason, the cons should not deter you from choosing the software. Below are some of the shares of disadvantages of the PCB software.

Hard to repair

Even though there is a guarantee of working to produce a finished product using the PCB software, if it is damaged, the process of repairing it is quite complicated. This is unlike the manual designs, which have removable components that are easy to repair. The PCB design software works as a single entity, thus if any component is damaged, getting it repaired is fairly hard compared to the manual ones, which have separate components that are a little bit easy to repair.

Cannot be put to various uses

The PCB design software can only perform one task, that which it was designed to do. This means that after it has been produced, it cannot be reprogrammed or updated to suit other tasks. If another task comes up, you will need to acquire another PCB design software to come up with the different design.

Can be harmful to the environment

The production based on the PCB design software relies heavily on technology coupled with other toxic chemicals. These in themselves are an enemy to the environment.

While the choice of whether to use the PCB design software or the manual way is left to you, experts will definitely recommend the use of PCB design software. This is because of the many pros they have over cons. As a business entity, your main concern is to reduce the costs of doing business, and this is best achieved by the use of technology.